Scott Eckert: When replacing trees, water well
Eventually, old trees need to be replaced with new ones. Newly planted trees take extra attention early on after planting in your landscape.
Newly planted trees have not established the extensive root system needed to absorb enough water during hot, dry, windy summers. Even trees two or three years old should receive special care.
Deep, infrequent watering and mulching can help trees become established. Newly transplanted trees need at least 10 gallons of water per week, and on sandy soils they will need that much applied twice a week. The secret is getting that water to soak deeply into the soil, so it evaporates more slowly and is available to the tree’s roots longer. One way to do this is to punch a small hole in the side of a 5-gallon bucket and fill it with water.
Let the water dribble out slowly next to the tree. Refill the bucket once, and you have applied 10 gallons. Very large transplanted trees and trees that were transplanted two to three years ago will require more water.
A perforated soaker hose is a great way to water a newly established bed or foundation planting. In sunbaked soil, you may need to rough up the surface with a hoe or tiller to get water to infiltrate easily. It may be helpful to set the kitchen oven timer, so you remember to move the hose or shut off the faucet. If you are seeing surface runoff, reduce the flow, or build a berm with at least a 4-foot diameter around the base of the tree to allow the water to percolate down through the soil, instead of spreading out.
Regardless of method used, soil should be wet at least 12 inches deep. Use a metal rod, wooden dowel, electric fence post or something similar to check depth. Dry soil is much harder to push through than wet.
— Scott Eckert is a Kansas State Research Extension agent for Harvey County. Horticulture is his specialty.